Insulated Tin Cable — Minecraft block

Insulated Tin Cable

A rubber-sheathed LV cable from Ala Industrial that carries 8 EU/tick over long distances at half the loss of bare tin, with no shock damage.

Block ID alaindustrial:insulated_tin_cable
Game versions
All versions

Description

Insulated Tin Cable is the rubber-sheathed LV energy-transfer wire from Ala Industrial for Minecraft 26.2, carrying 8 EU/tick with a packet cap of 8 EU. The rubber insulation halves attenuation from 0.006 to 0.003 per block compared to the bare Tin Cable, and completely prevents contact shock damage at any flow.

Insulated Tin Cable keeps tin's narrow throughput, so it is the most efficient wire for solar farms and other low flows over long distances, delivering 8/8/7/6/1 EU across 10/20/50/100/1000 blocks. Any flow above 8 EU/tick still requires a copper line. Insulated Tin Cable is crafted from six Tin Cables and three Rubber in a crafting table, yielding six cables, and works identically on Fabric and NeoForge.

Block properties

Item ID alaindustrial:insulated_tin_cable
/give command /give @p alaindustrial:insulated_tin_cable
Stackable Yes (64)
Best tool Shears
Hardness 0.2
Blast resistance 0.5
Java Edition Java Edition 26.2

Java Edition Guide

How to craft and use Insulated Tin Cable in Minecraft

  1. 1

    Gather tin cables and rubber

    You need six Tin Cables and three Rubber to craft Insulated Tin Cable.

  2. 2

    Open the crafting table

    Place six Tin Cables across the top and bottom rows and three Rubber across the middle row to yield six Insulated Tin Cables.

  3. 3

    Lay out the cable line

    Connect Insulated Tin Cables from your generator to your machines; each segment carries up to 8 EU/tick with only 0.003 attenuation per block.

  4. 4

    Keep flows under 8 EU/tick

    Insulated Tin Cable caps at 8 EU/tick, so route any higher flow through an Insulated Copper Cable line instead.

Important

The reduced 0.003 loss applies only inside a fully insulated tin network; mixing one insulated cable into a bare line does not improve the whole segment.

How to craft this block

Crafting
Insulated Tin Cable
6
Insulated Tin Cable

Frequently asked questions

What does Insulated Tin Cable do?

Insulated Tin Cable transfers up to 8 EU/tick of LV energy in Ala Industrial with only 0.003 attenuation per block and full protection from contact shock.

How do you craft Insulated Tin Cable?

Place six Tin Cables across the top and bottom rows and three Rubber across the middle row of a crafting table to get six Insulated Tin Cables.

How much EU can Insulated Tin Cable carry?

Insulated Tin Cable has a throughput of 8 EU/tick and a packet cap of 8 EU, so flows above 8 EU/tick need a copper line.

Is Insulated Tin Cable safe to touch?

Yes, the rubber sheath completely prevents contact shock damage at any energy flow.

What is the difference between Insulated Tin Cable and bare Tin Cable?

The insulated version halves attenuation from 0.006 to 0.003 per block and adds complete shock protection, while keeping the same 8 EU/tick throughput.

Does Insulated Tin Cable work on Fabric and NeoForge?

Yes, Insulated Tin Cable is registered for both Fabric and NeoForge and behaves identically on each loader in Minecraft 26.2.

Minecraft and all related materials are trademarks and copyrights of Mojang Studios © 2009–2026. This site is not an official Minecraft product and is not affiliated with or endorsed by Mojang Studios or Microsoft Corporation.