Fluxweave Boots
Fluxweave Boots are the powered footwear of the Fluxweave armor set in the Ala Industrial mod, halving fall damage while a 15,000 EU buffer lasts.
Description
Each pair carries a 15,000 EU buffer, accepts up to 32 EU per tick — the LV ceiling — from a Battery Box slot, a worn Energy Pack or third-party chargers, and burns 1 EU per second while worn and charged, so a full buffer lasts about four hours. Crafting takes four different components: three Tempered Iron, two Electronic Circuits, one Battery and two Fluxweave Cloth, and the recipe transfers the battery's charge into the finished piece — a full 2,000 EU Battery comes off the crafting table as already-charged boots. Durability is never consumed; the inventory bar shows the EU level instead, and Fluxweave Boots accept enchantments like ordinary armor (enchantability 18) and repair with Fluxweave Cloth. When all four set pieces hold a charge, the wearer additionally gains slow regeneration below full health at 200 EU per half-heart.
Block properties
| Item ID |
alaindustrial:fluxweave_boots
|
|---|---|
| /give command |
/give @p alaindustrial:fluxweave_boots
|
| Stackable | No |
| Renewable | No |
| Java Edition | Java Edition 26.2 |
Java Edition Guide
How to use Fluxweave Boots in Minecraft
-
1
Craft the boots
Place three Tempered Iron, two Electronic Circuits, one Battery and two Fluxweave Cloth on a crafting table. A charged Battery transfers its EU into the finished Fluxweave Boots, so use a full 2,000 EU Battery for boots that start working immediately.
-
2
Charge the buffer
Insert the boots into a Battery Box slot or wear an Energy Pack. The 15,000 EU buffer fills at up to 32 EU per tick, the LV-tier ceiling.
-
3
Wear and explore
Worn and charged, Fluxweave Boots soften fall damage by 50% and burn 1 EU per second, so a full buffer lasts about four hours of wear.
-
4
Complete the set
Craft and charge the helmet, chestplate and leggings as well: with all four pieces charged, the set regenerates health below maximum at 200 EU per half-heart.
Fluxweave Boots reduce fall damage but never cancel it completely — the reduction is hard-capped at 90% in the mod code, and protection stays on even at zero EU.
How to craft this block
Related blocks
Frequently asked questions
What do Fluxweave Boots do in Ala Industrial?
Fluxweave Boots give 2 armor points and soften fall damage by 50% while charged. At zero EU they keep working as ordinary iron-grade boots, only without the fall-damage bonus.
How do you craft Fluxweave Boots?
Arrange three Tempered Iron, two Electronic Circuits, one Battery and two Fluxweave Cloth on a crafting table. The Battery's charge carries over, so a full 2,000 EU Battery produces boots that are already charged.
How do you charge Fluxweave Boots?
Place the boots in a Battery Box slot or wear an Energy Pack; other mods' chargers also work through the item energy capability. The 15,000 EU buffer accepts up to 32 EU per tick.
How long does a full charge of Fluxweave Boots last?
A charged pair worn on the body drains 1 EU per second, so 15,000 EU covers roughly four hours of wear before the fall-damage bonus fades.
Can Fluxweave Boots break?
No. Durability is never consumed — wear is paid in EU — so the inventory bar shows the charge level. Fluxweave Boots can be enchanted like ordinary armor (enchantability 18) and repaired with Fluxweave Cloth.
Are Fluxweave Boots renewable?
No. The Electronic Circuit requires silver and nickel, and the Battery requires tin — metals that Ala Industrial generates only as worldgen ore, with no renewable source.
Minecraft and all related materials are trademarks and copyrights of Mojang Studios © 2009–2026. This site is not an official Minecraft product and is not affiliated with or endorsed by Mojang Studios or Microsoft Corporation.